Документы

ASTM International

Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
 N E3048

Annotation

This fire-test-response test method assesses the response of materials, products, and assemblies to controlled levels of heat flux with an external igniter.

The fire-test-response characteristics determined by this test method include the ignitability and time to burn-through of materials, products, and assemblies under well ventilated conditions.

Heat, smoke, and mass loss rate are not within the scope of this test method, but are addressed by Test Method E1623.

This test method uses the same burner as that described in Test Method E1623. Two burner types are described (Burner A and Burner B).

Specimens are exposed to a constant heat flux up to 50 kW/m2 in a vertical orientation. Hot wires are used to ignite the combustible vapors from the specimen.

This test method has been developed for evaluations, design, or research and development of materials, products, or assemblies, or for code compliance. The specimen shall be tested in thicknesses and configurations representative of actual end product or system uses.

Limitations of the test method are listed in 5.7.

This test method is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.

Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.